User's Manual

User’s Manual
23
Triggering Capture by the Radar 7.2
You can configure the Radar to trigger capture of the camera, and measure speed at the same time.
Log in to the camera web client. Step 1
Select Setting > Event > ANPR Snap > Illegal Capture > Rule Config. Step 2
Rule configuration Figure 7-3
Select ANPR from Event Type, and set other parameters as needed. Step 3
Click , and then configure the corresponding advanced parameters of ANPR. Step 4
Advanced parameters of ANPR event Figure 7-4
Table 7-1 Advanced parameter description
Name Description
Radar The system takes a violation snapshot of vehicles when the Radar detects it.
Video Analyse
The system analyzes the real-
time video to detect traffic violations. Once a
violation is detected, the system automatically captures pictures of the vehicle.
Copy to Copy the current settings to the same-type rules or all the rules.
Select Radar from Trigger Source and then click Confirm. Step 5