User's Manual

User’s Manual
21
6 Program Update
You can check the current firmware version and select update package to update.
Click Update. Step 1
You can get the current version information through clicking Read. Different radar firmwares
report different triggering messages, which allows you to distinguish whether the firmware
is burned right based on the version information.
Firmware update Figure 6-1
Click Browse to select update files. Step 2
 The update files must be saved in one folder.
 Inside the folder, there cannot be any other folders.
 Inside the folder, there cannot be any other non-related files.
If there are files starting with cali_speed_mea_application, the Radar IP will be restored to
the default value 192.168.1.108 after update.
Click Update. Step 3