User's Manual

User’s Manual
10
Connect the Radar automatically Figure 4-2
Optional operations. Step 4
 You can restart the Radar remotely by clicking Restart. Restart takes about 1.5 seconds.
You need to reconnect the Radar after restart.
 You can configure the connected Radar IP by clicking Config IP.
1. Click Read to obtain information of the current Radar.
2. Change parameters as needed, and then click Write to synchronize them to the
Radar.
After changing radar information, you need to search or manually add the Radar and
connect it again.
Configure the Radar IP Figure 4-3