User's Manual

User’s Manual
9
4 Software Configuration
You can configure and adjust the parameters of the Radar by using the attached software.
Starting the Software 4.1
Double-click "Multiple_Target_Radar_Setting_Tool.exe" to start the software. Step 1
On the main interface of the software, click Search at the lower-left corner to search for Step 2
radars on the same network segment as the software.
You can also manually add devices by clicking Manual next to Search and enter the Radar
IP.
Leave the rest of the parameters as default.
Add radar manually Figure 4-1
Click to connect the Radar. When it turns to green, the Radar is connected. Step 3
 Click next to the Radar to delete it.
 Click to disconnect the Radar.