Quick Start Guide

Quick Start Guide
IV
mild detergent. To avoid possible damage on device body coating which could cause
performance decrease, do not use volatile solvent such as alcohol, benzene, diluent to
clean the device body, nor can strong, abrasive detergent be used.
● Dome cover is an optical component. Do not touch or wipe the cover with your hands
directly during installation or operation. For removing dust, grease or fingerprints, wipe
gently with moistened oil-free cotton with diethyl or moistened soft cloth. You can also
remove dust with an air blower.
● Strengthen the protection of network, device data and personal information by adopting
measures which include but not limited to using strong password, changing password
regularly, upgrading firmware to the latest version, and isolating computer network. For
some devices with old firmware versions, the ONVIF password will not be changed
automatically along with changing the system password, and you need to upgrade the
firmware or manually change the ONVIF password.
● Use standard components or accessories provided by manufacturer and make sure that the
device is installed and maintained by professional engineers.
● Do not expose the surface of the image sensor to laser beam radiation in an environment
where a laser beam device is used.
● Do not provide two or more power supply sources for the device unless otherwise specified.
A failure to follow this instruction might cause damage to the device.