Quick Start Guide

Quick Start Guide
9
4.3 Installing Camera
4.3.1 Installation Method
Figure 4-3 Installation method
4.3.2 Installing SD Card
● SD card slot is available on select models.
● Disconnect the power before installing or removing the SD card.
● Do not open the cover for a long time to avoid spray in cameras.
Press the reset button for 10 seconds to reset the device.
Figure 4-4 Install SD card
4.3.3 Attaching Camera
● Make sure that the mounting surface is strong enough to hold at least three times the weight
of the camera and bracket.
● Remove the protective film after finishing installation.