Quick Start Guide

Quick Start Guide
6
3 Operating with DMSS
To ensure the best possible wireless performance, make sure that there are no obstacles
and electromagnetic interference between the device and the router.
Step 1 Add the device.
1) Tap
+
button on the upper-right corner of the DMSS home page to scan the QR
code on the camera. If your DMSS fails to scan the QR code, tap
Manually enter
SN
.
2) Choose
Wireless Camera
.
Figure 3-1 Add the device
Step 2 Configure the device hotspot.
If you connect the device with Ethernet cable, please jump to Step4 directly.
1) Click
...
on the upper right corner and choose
Switch to AP configuration
.
2) Go to Wi-Fi settings of your mobile phone, connect hotspot named DAP-xxxxxxxx.
3) Create the username and password for the device and then tap
Next
.