Quick Start Guide
Table Of Contents
Quick Start Guide
1
1 Introduction
1.1 Cable
Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and
water damage. For the detailed operation, see FAQ manual.
Figure 1-1 Cables
Table 1-1 Cable information
No. Port Name Description
1 Ethernet port
●
Connects to network with network cable.
●
Provides power to the device with PoE.
Do not connect both network cable and Wi-Fi at the same
time.
2 Power port
Inputs 12 VDC power. Be sure to supply power as instructed in
the manual.
Device abnormity or damage might occur if power is not
supplied correctly.
1.2 LED Status
Table 1-2 LED Status
LED Status Device Status
Solid green Working normally.
Fast flashing green Connecting to Wi-Fi.
Slowly flashing green Enabling device hotspot.
Solid red
●
Starting/Restarting.
●
Resetting to factory default.
Slowly flashing red Wi-Fi disconnected.