Quick Start Guide

Quick Start Guide
5
Figure 2-3 Device initialization
Step 9 Select
Easy4ip
or select
Auto-check for updates
according to the actual needs. If neither,
leave them unselected.
Step 10 Click
OK
to initialize the device.
Click the success icon ( ) or the failure icon ( ) for the details.
Step 11 Click
Finish
.
2.2 Changing Device IP Address
You can change IP address of one or multiple devices at one time. This section is based on
changing IP addresses in batches.
Changing IP addresses in batches is available only when the corresponding devices have the
same login password.
Step 1 Follow Step1 to Step5 in "2.1 Initializing Device" to search for devices on your network
segment.
After clicking
Search Setting
, enter the username and password, and make sure that they
are the same as what you set during initialization; otherwise there will be wrong password
notice.
Step 2 Select the devices whose IP addresses need to be modified, and then click
Batch Modify
IP
.
Step 3 Select
Static
mode, and then enter start IP, subnet mask, and gateway.