Quick Start Guide

Quick Start Guide
1
1 Introduction
1.1 Cable
Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and
water damage. For the detailed operation, see FAQ manual.
Figure 1-1 Cables
Table 1-1 Cable information
No. Port name Description
1 Power input
Inputs 12 VDC power. Be sure to supply power as instructed in
the manual.
Device abnormity or damage might occur if power is not
supplied correctly.
2 Ethernet port
●
Connects to network with network cable.
●
Provides power to the device with PoE.
PoE is available on select model.
3 Alarm I/O
Includes alarm signal input and output ports, the number of
I/O ports might vary on different devices. For detailed
information, see Table 1-2.
4 Audio input
Connects to sound pickups to receive audio signal.
Audio input is available on select models.
5 Audio output
Connects to speaker to output audio signal.
Audio output is available on select models.
Table 1-2 Alarm information
Port Port Name Description
Alarm I/O
ALARM_OUT Outputs alarm signal to alarm device.
ALARM_IN Receives the switch signal of external alarm source.
ALARM_GND Ground connection.