Installation Instructions

Introduction
Note:
Press and hold the reset button for 10 s to reset the camera.
Camera
The pattern of the LED indicator is included in the following table.
LED Indicator Status
Green light flashing
Green light on
Red light flashing
Green and Red light
flashing alternately
Powered off/LED turned off
Rebooting after reset
Booting
Device malfunction
Waiting for network
Operating properly
Network connection failed
Off
Red light on
Firmware updating
Version 1.0.0
Quick Start Guide
QSG ×1
Floodlight Camera ×1 Screw Package ×1Mounting Plate×1
Mounting Screws ×1
Bracket Screws ×4 Wire Nut ×3
Assembly
Junction Box
(not included)
Mounting Plate
Bracket Screws
Mounting Screws
Camera Lock Collar
Application
Hook ×1
10 Meters (33 feet)
3 Meters (10 feet)
When mounted at 3 m (10 feet) off
the ground, with the PIR lens parallel
to the ground, the motion detector
is optimized to detect human-sized
objects at up to 10 m (33 feet).
Floodlight
Floodlight
Build-in Mic
Lens
LED Indicator
PIR Detector
Micro SD Card Slot
Reset Button
Built-in Speaker
Photosensor