Quick Start Guide

Quick Start Guide
1
1 Introduction
1.1 Cable
Waterproof all the cable joints with insulating tape and waterproof tape to avoid water damage and
prevent short circuits from occurring. For details, see the FAQ manual.
Figure 1-1 Cables
Table 1-1 Cable information
No.
Port Name
Description
1 Ethernet port
Connects to the network through a network cable.
Do not connect both network cable and Wi-Fi at the same
time.
2 Power port
Inputs 12 VDC power. Be sure to supply power as instructed in
the manual.
The device might become damaged or behave abnormally if
power is not correctly supplied.
1.2 LED Status
Table 1-2 LED status
LED Status
Device Status
Solid green Working properly.
Solid red
●
Starting/Restarting.
●
Resetting to factory default.
Slowly flashing red Network disconnected.
Flashing red and green Updating firmware.