Quick Start Guide

1
1 Introduction
 Cable type might vary with different devices, and the actual product shall prevail.
 Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit
and water damage. For the detailed operation, see the FAQ manual.
Cable list Figure 1-1
For more information about cable ports, see Table 1-1, and for the pattern of the LED Indicator,
see Table 1-2.
Table 1-1 Cable information
No.
Port Name
Function
1
Ethernet port
Connects to network with network cable.
2
12V DC
power input
Inputs 12V DC power. Please be sure to supply power as instructed
in the Guide.
Device abnormity or damage could occur if power is not supplied
correctly.
Table 1-2 LED indicator description
LED Indicator Status
Device Status
Red light on
Booting

Device malfunction

Failed to boot up

Green light flashing
Waiting for Wi-Fi network
Green light on
Operating properly
Green light quick flashing
WPS mode
Green and Red light
flashing alternately
Firmware updating