Quick Start Guide

2
2 Product Introduction
For the introduction of the device, see Figure 2-1 and Figure 2-2.
Press and hold the reset button for 10 s to reset the device.
The pattern of the LED indicator is included in Table 2-1.
Table 2-1 LED indicator pattern
LED Indicator Status
Device Status
Off
Powered off/LED turned off
Rebooting after reset
Red light on
Booting
Device malfunction
Red light flashing
Waiting for network
Green light on
Operating properly
Red light flashing
Network connection failed
Green and red light
flashing alternately
Firmware updating