User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Structure
- 2 Connection and Installation
- 3 Local Configurations
- 4 Web Configurations
- Appendix 1 Important Points of Intercom Operation
- Appendix 2 Important Points of QR Code Scanning
- Appendix 3 Important Points of Fingerprint Registration Instructions
- Appendix 4 Important Points of Face Registration
- Appendix 5 Cybersecurity Recommendations
5
Figure 2-6 Wall mount
2.3.2 86 Case Mount
Step 1 Put an 86 case in the wall at an appropriate height.
Step 2 Fasten the bracket to the 86 case with two screws.
Step 3 Wire the Access Controller. For details, see "2.1 Wiring"
Step 4 Use two screws to fix the back cover to the Access Controller.
Step 5 Fix the Access Controller on the bracket.
Step 6 Screw in two screws securely at the bottom of the Access Controller.
Figure 2-7 86 case mount