User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Connection and Installation
- 3 System Operations
- 4 Web Operations
- 4.1 Initialization
- 4.2 Login
- 4.3 Resetting the Password
- 4.4 Alarm Linkage
- 4.5 Call Configuration
- 4.6 Data Capacity
- 4.7 Video Setting
- 4.8 Face Detect
- 4.9 Network Setting
- 4.10 Safety Management
- 4.11 User Management
- 4.12 Maintenance
- 4.13 Configuration Management
- 4.14 Upgrade
- 4.15 Version Information
- 4.16 Online User
- 4.17 System Log
- 4.18 Exit
- 5 FAQ
- Appendix 1 Notes of Temperature Monitoring
- Appendix 2 Notes of Face Recording/Comparison
- Appendix 3 Cybersecurity Recommendations
60
When grid number is smaller than the threshold, green line will appear; when grid
number is more than the threshold, red line will appear. See.
Click OK to finish the setting.
4.7.5 Volume Setting
You can adjust volume of the access controller speaker.
Volume setting
4.7.6 Image Mode
There are three options: indoor, outdoor and other. Select Indoor when the access controller is
installed indoors; select Outdoor when the access controller is installed outdoors; and select
Other when the access controller is installed at places with backlights like corridors and
hallways.
Image mode
4.7.7 Local Coding
Set up the area to be displayed on the indoor monitors.
Log in to the web.
Select Video Setting > Local Coding.
Enable the function.