User's Manual

HTTPS Port

Default value is 443.

RTSP Port

Default value is 554.

Click OK to complete the setting.

Step 3

4.9.3 Register

When connected to external network, the terminal will report its address to the server that is

designated by the user so that clients can get access to the terminal.

Select Network Setting > Auto Register. Step 1

Select Enable, and enter host IP, port, and sub device ID. Step 2

Table 4-13 Auto register description

Parameter

Description

Host IP

Server IP address or server domain name.

Port

Server port used for auto registeration.

Sub Device ID

Terminal ID assigned by the server.

Click OK to complete the setting. Step 3

4.9.4 P2P

Peer-to-peer computing or networking is a distributed application architecture that partitions

tasks or workloads between peers. Users can download mobile application by scanning QR

code, and then register an account so that more than one terminal can be managed on the

mobile app. You do not need to apply dynamic domain name, do port mapping or do not need

transit server.

If you are to use P2P, you must connect the terminal to external network; otherwise the terminal

cannot be used.