User's Manual

27
Name
Description
Recognition
is, the wider range of the profiles will be recognized.
Pupillary Distance
Pupillary distance is the pixel value of the image between the centers
of the pupils in each eye. You need to set an appropriate value so
that the access controller can recognize faces as needed. The value
changes according to the face sizes and the distance between faces
and the lens. The closer the face is to the lens, the greater the value
should be. If an adult is 1.5 meters away from the lens, the pupillary
distance value can be within 50 to 70.
Recognition Timeout
(S)
When a person who does not have the access permission stands in
front of the access controller and gets the face recognized, the
controller will prompt that face recognition failed. The prompt interval
is called recognition timeout.
Invalid Face Prompt
Interval (S)
When a face has no access permission stands in front of the access
controller, the controller will prompt that the face is invalid. The
prompt interval is invalid face prompt interval.
Anti-fake Threshold
This function prevents people from unlocking by human face images
or face models.
Temp Parameters
Set whether to enable the body temperature monitoring.
Temp Unit: Select a temperature unit.

 Temp Rect: Set whether to display the temperature monitoring
box or not.
 Temp Monitoring Distance (cm): This parameter is used to
calibrate the measured temperature. The default value is
20cm, Other values indicate that the temperature needs to
be calibrated according to the set distance. 80 cm is
recommended.
 Temp Threshold (°C): Set the temperature threshold. The
monitored body temperature will be judged as high temperature
if it is greater than or equal to the set value.
Temp Correction Value: This parameter is for testing. The

difference of the temperature monitoring environment might
cause the temperature deviation between the monitored
temperature and the actual temperature. You can select multiple
monitored samples for testing, and then correct the temperature
deviation by this parameter according to the comparison
between the monitored temperature and the actual temperature.
For example, if the monitored temperature is 0.5°C lower than
the actual temperature, the correction value is set to 0.5°C; if the
monitored temperature is 0.5°C higher than the actual
temperature, the correction value is set to -0.5°C.
Only the access controller with a temperature monitoring unit
supports this parameter.
Mask Parameters
No detect: Mask is not detected during face recognition.

Mask reminder: Mask is detected during face recognition. If the
