User's Manual

26
System 3.10
3.10.1 Time
You can do date format setting, date setting, time setting, DST setting, NTP check, time zone
settings.
 When you select Network Time Protocol (NTP), you need to configure the following
parameters. You need to enable the NTP Check function first. Server IP Address: enter the
IP address of the time server, time of the terminal will be synchronized with the time server.
 Port: Enter the port number of the time server.
 Interval (min): NPT check interval. Tap the save icon to save.
3.10.2 Face Parameter
Face parameter Figure 3-15
Tap a parameter and do configuration, and then tap .
Table 3-9 Face parameter
Name
Description
Face Recognition
Threshold
Face recognition accuracy can be adjusted. The larger the value is,
the higher the accuracy will be.
Max. Angle of Face
Set the control panel shooting angle of profiles. The larger the value