User's Manual

21
Add a group Figure 3-10
Table 3-4 Group parameter
Parameter
Description
User List
Add users to the newly created group.
1. Tap User List.
2. Tap , and then enter a user ID.
3. Tap to save the settings.
Unlock Mode
There are two options: PWD and Face.
Valid User
Valid users are the ones that have unlock permission. Doors can be
unlocked only when the number of users to unlock the doors equals the
valid user number.
Valid users cannot exceed the total number of users in a group.

If valid users equal total user numbers in a group, doors can only be

unlocked by all the users in the group.
If valid users are less than the total number of users in a group, doors

can be unlocked by any users whose number equals the valid user
number.
Tap to go back to the previous interface. Step 3
Tap to save the settings. Step 4
Enable the Group Combination. Step 5
 means enabled.
 means not enabled.
3.8.3 Alarm Configuration
Administrators can manage visitor unlock permission through alarm configuration.
Select Access > Alarm.
Alarm Figure 3-11
 means enabled.