User's Manual

16
Configure parameters on the interface. Step 2
Table 3-3 New user parameter description
Parameter
Description
User ID
Enter user IDs. The IDs can be numbers, letters, and their combinations, and
the maximum length of the ID is 32 characters. Each ID is unique.
Name
Enter names with at most 32 characters (including numbers, symbols, and
letters).
Face
Make sure that your face is centered on the picture capturing frame, and then a
picture of your face will be automatically captured.
PWD
The door unlocking password. The maximum length of the password is 8
characters.
Level
You can select a user level for new users. There are two options.
User: Users only have door unlock permission.

Admin: Administrators can not only unlock the door but also have

parameter configuration permission.
In case that you forget the administrator password, you had better create more
than one administrator.
Period
You can set a period in which the user can unlock the door. For detailed period
settings, see the configuration manual.
Holiday
Plan
You can set a holiday plan in which the user can unlock the door. For detailed
holiday plan settings, see the user manual.
Valid Date
You can set a period during which the unlocking information of the user is valid.
User Level
There are six levels:
General: General users can unlock the door normally.

Blacklist: When users in the blacklist unlock the door, service personnel

will get a prompt.
Guest: Guests are allowed to unlock the door certain times in certain

periods. Once they exceed the maximum times and periods, they cannot
unlock the door again.
Patrol: Patrolling users can get their attendance tracked, but they have no

unlock permission.
VIP: When VIP unlocks the door, service personnel will get a prompt.

Special: When special people unlock the door, there will be a delay of 5

seconds before the door is closed.
Use Time
When the user level is Guest, you can set the maximum number of times that
the guest can unlock the door.
Tap to save the configuration. Step 3
3.7.2 Viewing User Information
You can view user list, admin list and enable administrator password through the User
interface.