User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
79
Manual add
Enter the device name, select a method to add, enter the IP, Port number (37777 by
default), User Name, and Password.
Click Add, and then you can see the added access controller on the Devices interface.
User Management
4.3.1 Card Type Setting
Before issuing card, set card type first. For example, if the issued card is ID card, select type as ID
card.
Card types must be the same as card issuer types; otherwise card numbers cannot be read.
Log in to SmartPSS AC.
Click Personnel Manager.