User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
77
4 SmartPSS AC Configuration
You can manage the access controller through the SmartPSS AC client. For detailed
configurations, see the SmartPSS AC user manual.
SmartPSS AC interfaces might vary with versions, and the actual interface shall prevail.
Login
Install the SmartPSS AC.
Double-click , and then follow the instructions to finish the initialization and log
in.
Adding Devices
You need to add access controllers to the SmartPSS AC. You can click Auto Search to add and
click Add to manually add devices.
4.2.1 Auto Search
You can search and add access controllers at the same network segment to the SmartPSS AC.
Log in to SmartPSS AC.
Click Device Manager at the lower left corner.
Devices
Click Auto Search.