User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
73
You can select Auto Check to upgrade the system automatically. You can also
select Manual Check to upgrade the system manually.
The access controller will reboot after upgrade.
You click Version Info on the left navigation menu to check version after
upgrade.
Version Information
You can view information including MAC address, serial number, MCU version, web version,
security baseline version, system version, and firmware version.
Log in to the web interface.
Select Version Info on the navigation bar.
Online User
You can view username, IP address, and user login time on the Online User interface.
Log in to the web interface.
Select Online User on the navigation bar.
Online user
System Log
View and back up system logs, admin logs, and unlock records.
3.19.1 System Logs
View and search for system logs.