User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
53
Add a holiday plan
Enter a number and name for the holiday plan.
Select the number of a holiday group you configured.
Select 255 if you do not want to select a holiday group.
Configure periods for every day in the holiday group you selected. You can configure
up to four periods.
Click OK.
Data Capacity
You can see how many users, cards, fingerprints and face images the access controller can hold
on the Data Capacity interface.
Log in to the web interface.
Select Data Capacity on the navigation bar.
Video Setting
You can set parameters including data rate, image parameters (brightness, contrast, hue,
saturation, and more), and exposure on the Video Setting interface.
3.9.1 Data Rate
You can configure stream parameters for channel 1.
Log in to the web interface.
Select Video Setting > Video Setting > Data Rate.