User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
52
Add a holiday group
Enter a number and a name for the holiday group.
Click Add.
Add a holiday
Enter a name for the holiday, select the start and end date, and then click OK.
You can add multiple holidays for one holiday group.
Click OK.
3.7.3 Configuring Holiday Group
Set up a holiday plan. When adding a user on the access controller, you can select the holiday
plan, and then the user can only open the doors within the days defined in the holiday plan.
Log in to the web interface.
Select Time Section > Holiday Plan Config.
Click Add.