User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
47
Room number management
Enter the information.
Add one VTH
Table 3-7 Parameter description
Parameter
Description
First Name
To differentiate from othe rVTHs.
Last Name
Nick Name
Room No.
Room number of the VTH.
It can contain up to five digits and must be the same as the one
configured on the indoor monitor.
When there are main and sub VTHs, the room number of main VTH
should end with "-0", and that of sub VTHs with "-1", "-2", "-3"…For
example, the main VTH is 101-0, sub VTHs are 101-1, 101-2 and 101-3.