User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
46
Add a door station
Table 3-6 Parameter description
Parameter
Description
Rec No.
Enter a number for the VTO you want to add.
Register Password
Keep it default.
Build No.
Cannot be configured.
Unit No.
IP Address
IP address of the VTO you want to add.
Username
Web interface login username and password of the VTO you want to
add.
Password
Click OK.
3.6.4 VTH Number Management
When the access controller works as the SIP server, add VTHs to call them.
When there are main and sub VTHs, you need to enable group call function first before adding
them. See "3.6.2.1 Access Controller as SIP Server".
3.6.4.1 Add VTHs One by One
Log in to the web interface.
Select Talkback Setting > Room No. Management.
Click Add.