User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
44
Configure the parameters.
Local (1)
Table 3-4 Parameter description
Parameter
Description
Device Type
The access controller can only work as a unit VTO.
Centre Call
No.
Enter a number for the management center. It can contain up tp nine digits.
VTO No.
Cannot be configured when the access controller is working as the SIP
ser ver.
Group Call
When enabled, all sub VTHs will also receive the call when the access
controller is calling a main VTH.
This function is only available when the access controller is working as the
SIP ser ver.
Transmission
Mode
Mode1: Real-time call but the video and sound may be lagging with
poor network.
Mode2: Not real-time call but ensures smooth video and sound.
Click Confirm.
3.6.2.2 Other Device as SIP Server
Log in to the web interface.
Select Talkback Setting > Local.
Configure the parameters.
Local (2)
Table 3-5 Parameter description
Parameter
Description
Device Type
The access controller can work as a unit door station or fence
station.
Centre Call No.
Enter a number for the management center. It can contain up tp
nine digits.