User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
26
USB Import
Select the data type that you want to import.
Tap OK.
Data in the USB flash drive will be imported into the access controller.
2.12.3 USB Update
USB flash drive can be used to update the system.
Rename the updating file name to "update.bin", and save the "update.bin" file in the
root directory of the USB flash drive.
Log in to the Main Menu interface.
Select USB > USB Update.
Tap OK.
The update starts, and the access controller restarts after the update is finished.
Features
You can do settings about privacies, card number reverse, security module, door sensor type,
and result feedback.
Log in to the Main Menu interface.
Tap Features.