User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
25
USB can also be used to update the program.
2.12.1 USB Export
You can export data from the access controller to the USB after inserting the USB. The data
exported is encrypted and cannot be edited.
Log in to the Main Menu interface.
Select USB > USB Export.
USB export
Select the data type that you want to export.
Only certain models support fingerprint.
Tap OK.
The data will be saved in the USB.
2.12.2 USB Import
Only data in the USB that was exported from one access controller can be imported into
another access controller.
Log in to the Main Menu interface.
Select USB > USB Import.