User's Manual

39
Table 3-8 Room information
Parameter Description
Room No.
Enter the room number of the VTH.
●
The room number consists of 1-5 digits, and must
conform to the configured room number on the VTH.
●
When there are main VTH and extensions, the room
number of main VTH ends with -0 and the room number
of extension ends with -1, -2 or -3. For example, the main
VTH is 101-0, and the room number of the extension is
101-1, 101-2...
●
If the group call function is not turned on, room number
in the format of 9901-xx cannot be set.
First Name
Enter the name of the VTH to help you differentiate VTHs.
Last Name
Nick Name
Register Type
Keep them as defaults.
Registered Password
●
Add in batches
1. Click
Batch Add
2. Configure the parameters.
Figure 3-14 Batch add
Table 3-9 Batch add
Parameter Description
Unit Layer Amount The number of floors of the building (ranging from 1-99).
Room Amount in One Layer The number of rooms on each floor, which ranges from 1-99.
First Floor Number The first room on the first floor.
Second Floor Number
The first room on the second floor, which equals the first
room on the first floor plus the number of rooms on each
floor.
3.5.5 Adding the VTS
When the Access Controller functions as the SIP Server, you can add VTSs to the SIP server to make
sure they can call each other.
Step 1 On the Homepage, select
Talkback setting
>
VTS Management
.