User's Manual

52
Manual add
Enter detailed information of the device.
Table 4-1 Parameters
Parameter
Description
Device Name
Enter a name of the device. We recommend naming the device with
installation area for easy identification.
Method to add
Select IP to add the device through IP address.
IP
Enter IP address of the device. It is 192.168.1.108 by default.
Port
Enter the port number of the device. The port number is 37777 by
default.
User Name,
Password
Enter the username and password of the added device.
The username is admin and password is admin123 by default. We
recommend changing the password after login.
Click Add, and then you can see the added device on the Devices interface.
After adding, SmartPSS AC logs in to the device automatically. In case of successful
login, status displays Online. Otherwise, it displays Offline.