User's Manual

17
Figure 2-17 Face parameter (02)
Table 2-9 Description of face parameters
Name Description
Face Threshold
Adjust the face recognition accuracy. Higher threshold means
higher accuracy.
Max. Angle of Face
Set the maximum face pose angle for face detection. Larger value
means larger face angle range. If the face pose angle is out of the
defined range, the face detection box will not appear.
Pupillary Distance
Face images require desired pixels between the eyes (called
pupillary distance) for successful recognition. The default pixel is
45. The pixel changes according to the face size and the distance
between faces and the lens. If an adult is 1.5 meters away from
the lens, the pupillary distance can be 50 px-70 px.
Recognition Timeout (S)
If a person with access permission has their face successfully
recognized, the Time & Attendance will prompt face recognition
success. You can enter the prompt interval time.
Invalid Face Prompt Interval
(S)
If a person without access permission attempts to unlock the
door for several times in the defined interval, the Time &
Attendance will prompt face recognition failure. You can enter
the prompt interval time.
Anti-fake Threshold
Avoid false face recognition by using a photo, video, mask or a
different substitute for an authorized person's face.
●
Close: Turns off this function.
●
General: Normal level of anti-spoofing detection means
higher door access rate for people with face masks.
●
High: Higher level of anti-spoofing detection means higher
accuracy and security.
●
Extremely High: Extremely high level of anti-spoofing
detection means extremely high accuracy and security.
BeautyEnable Beautify captured face images.