User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Data Capacity
- 3.5 Configuring Video and Image
- 3.6 Configuring Face Detection
- 3.7 Configuring Network
- 3.8 Safety Management
- 3.9 User Management
- 3.10 Maintenance
- 3.11 Configuration Management
- 3.12 Upgrading System
- 3.13 Viewing Version Information
- 3.14 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Face Registration
- Appendix 2 Cybersecurity Recommendations
16
Parameter Description
NTP Check
A network time protocol (NTP) server is a machine dedicated as the
time sync server for all client computers. If your computer is set to
sync with a time server on the network, your clock will show the same
time as the server. When the administrator changes the time (for
daylight savings), all client machines on the network will also update.
1. Tap
NTP Check
.
2. Turn on the NTP check function and configure parameters.
●
Server IP Address
: Enter the IP address of the NTP server, and
the Time & Attendance will automatically sync time with NTP
server.
●
Port
: Enter the port of the NTP server.
●
Interval (min)
: Enter the time synchronization interval.
Time Zone Select the time zone.
2.9.2 Configuring Face Parameters
Step 1 On the main menu, select
System
>
Face Parameter
.
Step 2 Configure the face parameters, and then tap .
Figure 2-16 Face parameter (01)