User's Manual

10
Figure 2-8 Element (multiple choice)
Table 2-5 Shift parameters description
Parameter Description
Shift Name Enter the name of the shift.
Period 1 Set the time attendance periods. If you set 08:00 —17:00, you need to
punch in before 08:00 or earlier, and punch out at 17:00 or later,
otherwise the abnormal attendance is abnormal. You can set two
periods at the same time, the two periods cannot overlap. People must
punch in and punch out in the both defined periods, and make sure their
attendance is normal.
Period 2
Overtime Period
People who punch in/out in the defined overtime period works beyond
normal working hours.
Late-in Allowed(min) The late-in and early-out allowed time is used mainly to give the
employee a little flexibility to come a little late or leave a little early from
work. For example, if the normal punch-in time is 8:00, and the late-in
allowed time is set to 5 minutes, the employee who arrives at 8: 06 AM
will be marked late by 1 minute.
Early-out
Allowed(min)
All attendance times are precise down to the second level, for example, if the punch-time
is set to 8:05 AM, the employee who punches in at 8:05:59 AM will be marked normal
attendance. If the employee who arrives at 8: 06 AM, they will be marked late by 1 minute.
Step 4 Tap .
2.8.3 (Optional) Configuring Holiday Plans
Configure holiday plans during which the time attendance will not tracked.
Step 1 Select
Attendance
>
Shift Setting
>
Holiday
.
Step 2 Click to add holiday plans.
Step 3 Configure the parameters.