User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Local Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Logging In
- 3.3 Resetting the Password
- 3.4 Data Capacity
- 3.5 Configuring Video and Image
- 3.6 Configuring Face Detection
- 3.7 Configuring Network
- 3.8 Safety Management
- 3.9 User Management
- 3.10 Maintenance
- 3.11 Configuration Management
- 3.12 Upgrading System
- 3.13 Viewing Version Information
- 3.14 Viewing Logs
- 4 Smart PSS Lite Configuration
- Appendix 1 Important Points of Face Registration
- Appendix 2 Cybersecurity Recommendations
4
the intercom function.
●
If there is no operation in 30 seconds, the Time & Attendance will go to the standby mode.
●
This manual is for reference only. Slight differences might be found between the standby screen
in this manual and the actual device.
Figure 2-2 Homepage
Table 2-2 Home screen description
No. Name Description
1 Status display Displays status of Wi-Fi, network and USB, and more.
2 Date and time Displays the current date and time.
3 Verification methods Displays available verification methods.
4 Password Enter user ID and password to punch in or punch out.
2.4 Initialization
For the first-time use or after restoring factory defaults, you need to select a language on Time &
Attendance, and then set the password and email address for the admin account. You can use the
admin account to log in to the main menu of the Time & Attendance and the webpage.
●
If you forget the administrator password, send a reset request to your registered e-mail address.
●
The password must consist of 8 to 32 non-blank characters and contain at least two types of
characters among upper case, lower case, number, and special character (excluding ' " ; : &).
2.5 Logging In
Log in to the main menu to configure the Time & Attendance. Only admin account and administrator