User's Manual

User’s Manual
9
Parameter Description
Keypad Config
Enable the keys on the keypad first and set if an event
happens.
●
Fire Alarm: Enable by default. After enabling the Fire
Alarm, when a fire is detected, you need to press and
hold the fire key on the keypad for 3 seconds to trigger
fire alarms.
●
Link Fire Alarm to Siren: Enable by default. After
enabling the function, the siren and the buzzer will be
linked when fire alarms are triggered.
●
Emergency Alarm: Enable by default. After enabling the
Emergency Alarm, when an emergency is detected, you
need to press and hold the emergency key on the
keypad for 3 seconds to trigger emergency alarms.
●
Link Emergency Alarm to Siren: Enable by default.
After enabling the function, the siren and the buzzer will
be linked when emergency alarms are triggered.
●
Medical Alarm: Enable by default. After enabling the
Medical Alarm, when a fire is detected, you need to
press and hold the medical key on the keypad for 3
seconds to trigger fire alarms.
●
Link Medical Alarm to Siren: Enable by default. After
enabling the function, the siren and the buzzer will be
linked when medical alarms are triggered.
Keypad Lock Status
Set the number of attempts to enter the wrong passcode
and lock time for the keypad.
●
Enable the keypad lock function first.
●
For the number of attempts to enter the wrong
passcode within 30 minutes, you can select from 3 to 10
times. 5 is set by default.
●
For the lock time, you can select from 3, 5, 10, 20, 30, 60,
90 and 180 minutes. 3 minutes is set by default.
No Passcode Arming
Set whether you can use the keypad to arm the system
without passcode. Disable by default.
Enable No Passcode Arming function does not meet
EN50131-1 certifications.