User's Manual

User’s Manual
8
Parameter Value
Transmit through
Repeater
The status of whether the keypad forwards its messages to the
hub through the repeater.
Program Version The program version of the keypad.
6.2 Configuring the keypad
On the hub screen, select a keypad from the accessory list, and then tap to configure
the parameters of the keypad.
Table 6-2 Keypad parameter description
Parameter
Description
Device Configuration
●
View keypad name, type, SN and device model.
●
Edit keypad name, and then tap Save to save
configuration.
Area Select the area to which the keypad is assigned.
Control Permissions Used to set which area the keypad can operate.
Temporary Deactivate
Whether send commands to the alarm hub.
●
Tap Enable, and then the keypad will send commands
to the hub. Enable is set by default.
●
Tap Only Disable Tamper Alarm, and then the system
will only ignore tamper alarm messages.
●
Tap Disable, and then the keypad will not send
commands to the hub.