User's Manual

User’s Manual
3
4 Adding the Keypad to the Hub
Before you connect it to the hub, install the DMSS app to your phone. This manual uses iOS as
an example.
●
Make sure that the version of the DMSS app is 1.98 or later, and the hub is
V1.001.0000000.8.R.220319 or later.
●
Make sure that the hub has a stable internet connection.
●
Make sure that the hub is disarmed.
Step 1 Go t
o the hub screen, and then tap to add the keypad.
Step 2 Tap to scan the QR code at the bottom of the keypad, and then tap Next.
Step 3 Tap Next after the keypad has been found.
Step 4 Follow the on-screen instructions and switch the keypad to on, and then tap Next.
Step 5 Wait for the pairing.
Step 6 Customize the name of the keypad, and select the area, and then tap Completed.