User's Manual
Table Of Contents
User’s Manual
10
6 Installation
6.1 Field of View
Field of view of the PIR–Camera are shown below.
When installing and using the PIR–Camera, make sure there are no objects partially or fully
obscuring the detector's field of view.
Figure 6-1 Field of View
6.2 Installing the PIR–Camera
Before installation, add the PIR–Camera to the hub and test the signal strength and RF-HD. We
recommend installing the PIR–Camera in a place with a signal strength of at least 2 bars.
Step 1 Drill 4 holes in the wall according to the hole positions of the PIR–Camera, and then
put the expansion bolts into the holes.