User's Manual

User’s Manual
9
5 Adding the PIR–Camera to the Hub
Before you connect it to the hub, install the DMSS app to your phone. This manual uses iOS as
an example.
●
Make sure that the version of the DMSS app is 1.99 or later, and the hub is
V1.001.0000000.8.R.220528 or later.
●
Make sure that the hub has a stable internet connection.
●
Make sure that the hub is disarmed.
Step 1 G
o to the hub screen, and then tap to add the PIR–Camera.
Step 2 Tap to scan the QR code at the bottom of the PIR–Camera, and then tap Next.
Step 3 Tap Next after the PIR–Camera has been found.
Step 4 Follow the on-screen instructions and switch the PIR–Camera to on, and then tap
Next.
Step 5 W
ait for the pairing.
Step 6 Customize the name of the PIR–Camera, and select the area, and then tap Completed.