User's Manual

User's Manual
6
5 Installation
Prior to installation, connect the repeater to the hub and check the signal level at the installation
location. We recommend installing the repeater in a place with the signal strength of at least 2 bars.
Use the provided screws to mount the repeater in locations accessible for future maintenance.
Mount the repeater in a location that does not have metals and metal objects. Duct work, wire mesh
screens and boxes, and other similar metal based objects will reduce the RF range.
Figure 5-1 Installation
Table 5-1 Installation items
No. Item Name No. Item Name
1 Repeater 4 Mounting plate
2 M3 × 8 mm countersunk head screw 5 Expansion bolt
3 ST4 × 25 mm self-tapping screw 6 Wall
Step 1 Confirm the position of screw holes, and then drill them on the mounting plate.
Step 2 Put the expansion bolts into the holes.
Step 3 Put the mounting plate into the wall, and then align the screw holes on the plate with the
expansion bolts.
Step 4 Fix the mounting plate with ST4 × 25 mm self-tapping screws.
Step 5 Put the alarm hub into the mounting plate from top to bottom.
Step 6 Fix the alarm hub and mounting plate with M3 × 8 mm countersunk head screws.