User's Manual

User's Manual
5
4 Connecting to the Hub
Before you connect it to the hub, install the DMSS app to your phone. This manual uses iOS as an
example.
●
Make sure the version of the DMSS app is 1.94 and later, and the hub is V1.001.R.20211215 and
later.
●
Make sure that you have already created an account, and added the hub to DMSS.
●
Make sure that the hub has a stable internet connection.
●
Make sure that the hub is disarmed.
Step 1 Go to the hub screen, and then tap to add the repeater.
Step 2 Tap to scan the QR code at the bottom of the repeater, and then tap
Next
.
Step 3 Tap
Next
after the repeater has been found.
Step 4 Follow the on-screen instructions and switch the repeater to
ON
, and then tap
Next
.
Step 5 Wait for the pairing.
Step 6 Customize the name of the repeater and select the area, and then tap
Completed
.