Alarm Repeater User's Manual ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.2.
User's Manual Foreword General This manual introduces the functions and operations of the alarm repeater (hereinafter referred to as the "repeater"). Safety Instructions The following signal words might appear in the manual. Signal Words Meaning DANGER Indicates a high potential hazard which, if not avoided, will result in death or serious injury. WARNING Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury.
User's Manual For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit our official website. The manual is for reference only. Slight differences might be found between the electronic version and the paper version. ● All designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual.
User's Manual Important Safeguards and Warnings This section introduces content covering the proper handling of the Device, hazard prevention, and prevention of property damage. Read carefully before using the Device, comply with the guidelines when using it, and keep the manual safe for future reference. Operation Requirements ● ● ● ● ● Make sure that the power supply of the device works properly before use. Do not pull out the power cable of the device while it is powered on.
User's Manual Table of Contents Foreword ........................................................................................................................................................................................................I Important Safeguards and Warnings............................................................................................................................................ III 1 Introduction ...........................................................................
User's Manual 1 Introduction Alarm repeater is a wireless repeater device that extends the communication range between the alarm hub and other accessories, and forwards messages received from the accessory to the hub. It provides a secondary communication path for accessories, improving the overall stability and reliability of communication of the wireless security system. You can use the DMSS app to manually select a path for accessories or allow the system to automatically select one for them.
User's Manual 2 Checklist Figure 2-1 Checklist Table 2-1 Checklist No. Item Name Quantity No.
User's Manual 3 Design 3.1 Appearance Figure 3-1 Appearance Table 3-1 Structure No. Name Description 1 Indicator ● Solid green: Turned on. ● Flashes green: Pairing with the hub. Switch to ON to turn on the repeater, and OFF to turn it off. 2 Power switch OFF is set by default. Insert power cable. 3 Power cable socket Powered by 12 VDC power supply. 4 Tamper switch When the tamper switch is released, the tamper alarm will be triggered. 5 Lid ● Lid closed: Normal status.
User's Manual 3.
User's Manual 4 Connecting to the Hub Before you connect it to the hub, install the DMSS app to your phone. This manual uses iOS as an example. ● Make sure the version of the DMSS app is 1.94 and later, and the hub is V1.001.R.20211215 and later. ● Make sure that you have already created an account, and added the hub to DMSS. ● Make sure that the hub has a stable internet connection. ● Make sure that the hub is disarmed. Step 1 Go to the hub screen, and then tap to add the repeater.
User's Manual 5 Installation Prior to installation, connect the repeater to the hub and check the signal level at the installation location. We recommend installing the repeater in a place with the signal strength of at least 2 bars. Use the provided screws to mount the repeater in locations accessible for future maintenance. Mount the repeater in a location that does not have metals and metal objects. Duct work, wire mesh screens and boxes, and other similar metal based objects will reduce the RF range.
User's Manual 6 Configuration You can view and edit general information of the repeater. 6.1 Configuring the Repeater On the Hub screen, select the repeater as needed from the accessory list, and then tap to configure the parameters of the repeater. Table 6-1 Repeater parameter description Parameter Device Configuration Area Description ● View device name, type, SN and device model. ● Edit device name, and then tap Save to save configurations. Select the area to which the repeater is assigned.
User's Manual Parameter Description Tap Peripherals Pairing, and then you can manually set the accessories to forward messages to the hub through the repeater. ● View the status of all the accessories that are connected to the hub. ● In the To be Paired list, select an accessory, and then tap next to the accessory to manually select a secondary communication path for it. Afterwards, the selected accessory will be displayed in the Paired list.
User's Manual 6.2 Status of the Repeater On the Hub screen, select the repeater as needed from the accessory list, and then you can view the status of the repeater. Table 6-2 Status Parameter Description Temporary Deactivate The status for whether the functions of the repeater are enabled or disabled. ● : Enable. ● : Only disable tamper alarm. ● : Disable. The signal strength between the hub and the repeater. ● : Low. Signal Strength ● ● ● ● External Power Status : Week. : Good. : Excellent. : No.
User's Manual
