User's Guide
6
How to totalize Current Weighing Data
Step 1: Hang heavy on scale
Step 2: Wait data stabilize
(stable symbol displays)
Step 3: Press“
”
Step 4: Instrument will display “Total accumulative data” and “accumulative times”
Attention:
■ Zero and minus weight cannot be accumulated
■ Operate until stable symbol displays
■ One weighing value only can be totalized for one time, cannot be repeated to
accumulate.
■ Can totalize 99 sets of data,save and turn off.
■ If operate accumulated data wrong, can use single to clear data, this time scale body
is no need to be return to zero, and can accumulate again.
How to Review Reserved Data
If need to review accumulative data after accumulating many times:
Step 1: Press “
” Display “accumulative total weights”
Step 2: Press “
”again, Display “accumulative times”
Attention:
■ After pressing “
”,displays state of accumulative total and total times, back to
weighing state after 10 seconds.
■ When no accumulative data in memory,press“ ”, no effect.
How to clear data
■ Single clear & Total clear Single clear: Clear last weighing data
■ Total clear: Clear all weighing data.
■ Step 1: Press “
”, Display: “CLL 1”
■ Step 2: Press “∧” or “∨” Convert last bit between 1 and 2: 1 --- Single clear; 2 ---
Single clear
■ Step 3: Choose single clear or total clear, press “
”to confirm. If successfully
cleared, indicator shows “End”.
Attention:
■ ■ If operate accumulated data wrong, can use single to clear data, this time scale
body is no need to be return to zero, and accumulate again.