User's Guide

5
shows scale body in state of zero
this symbol shows weighing data go into the steady state
Displaying this symbol shows hand-held display in state of Tare. The weight value will be
the net weight.
shows unit is not kg
shows unit is kg
Message：
Display Time, serial number and battery power. Or no signal, please check the Antenna or
battery.
Show overloading。If there is no weight on scale body, no overloaded, the down-lead from
load cell to transmitter is wrong linked or cut.
After power-on self-test, displays above and light up under-voltage sign, after two seconds
shutdown automatically. Shows hand-held instrument batteries under-voltage, cannot be
used normally, please recharge.
After turning on power，if hand-held instrument displays above, shows batteries of hoist
scale end under-voltage，please recharge. After several seconds transmitter of hoist scale
shutdown automatically.