User's Manual

Connect
Connect the power supply to this position and
Auto
Calibration
The printer will automatically calibrate the build platform
print. It will calibrate the platform automatically. This function requires the vat to be
free of cured resin particles. Please see the troubleshooting section for more detail.
Using The M
enu
•Pressing the top button
will
•Pressing
the bottom button
•Press the top button to
while editing a value decreases that value.
•
Press the bottom button
•Press the center button
to activate the selected menu item or to save an edited
value.
5
Connect the power supply to this position and
power on the machine.
Calibration
The printer will automatically calibrate the build platform
when homing and starting a
print. It will calibrate the platform automatically. This function requires the vat to be
free of cured resin particles. Please see the troubleshooting section for more detail.
enu
System
will
change the menu choice left and up.
the bottom button
will change the menu choice
right and down.
while editing a value decreases that value.
Press the bottom button
while editing a value increases that value.
to activate the selected menu item or to save an edited
when homing and starting a
print. It will calibrate the platform automatically. This function requires the vat to be
free of cured resin particles. Please see the troubleshooting section for more detail.
right and down.
to activate the selected menu item or to save an edited