User's Manual

3-5. After you make sure the installation is correct and fixedness, please
connect the terminal of Power, TV input signal, VIDEO and AUDIO
input signal with base insert holes of post assembly. (Please comply
with the installation instruction to connect strictly) (See diagram 5)
3-3. Fasten the TV and Quadrangle locking plate by 4pcs⑥M5*12 mm
Pan head screw and 4pcs ⑤ washer. Make sure the installation is
fixedness. (See diagram 3)
3-6. After finish and check above installation step, please connect
terminal of power, TV signal, VEDIO and AUDIO signal of TV with
top insert holes of post assembly. ( Please comply with the installation
instruction to connect strictly) ( diagram6)see
Diagram 5
Diagram 4
Diagram 3
Do not connect with the
insert holes of TV directly !
Connect the terminal
of TV directly !
Diagram 6
Warning:
The top insert holes of post assembly is only to connect
the terminal of power input, TV signal input, VIDEO and
AUDIO signal input of TV. Please operate it according to
the installation instruction, otherwise manufacturer will
not bear compensation and law obligation for any damage
and safety problem.
Warning:
The base insert holes of post
assembly is for power input, TV
signal input, VIDEO and AUDIO
signal input. The outside signal can
be send to post assembly through it,
do not connect with the inserts
holes of TV directly. Please operate
it strictly according to the installa-
tion instruction, otherwise manuf-
acturer will not bear compensation
and law obligation for any damage
and safety problem.
3-4. Hang Quadrangle (with TV) to the hooking gap of the mounting
panel ,Then tighten the lower end of Quadrangle by ⑦
head screws. (See diagram 4)
2pcs M6*10mm
Flat
Quadrangle
locking plate
2 PE O PL E LIF T THE
AS S EM BLY UN IT.
M5*12mm
Ø * mm16 1.5
2 PE O PL E LIF T THE
AS S EM BLY UN IT.
M6*10mm
AUDIO
POWER
(100~220V)
VIDEO
TV
R
L
AUDIO
VIDEO
TV
R L
POWER (100~220V)