User's Manual

3-6.After finish and check above installation step, please connect
terminal of power, TV signal, VEDIO and AUDIO signal of TV with
top insert holes of post assembly. (Please comply with the installation
instruction to connect strictly) ( diagram6)see
3-5.After you make sure the installation is correct and fixedness, please
connect the terminal of Power, TV input signal, VIDEO and AUDIO
input signal with base insert holes of post assembly. (Please comply
with the installation instruction to connect strictly)( 5)see diagram
Connect the terminal
of TV directly !
3-3. First, fix the main bracket on locking plate by 4pcs M6*10mm
head screw. Then insert the square tube into the hole of main bracket,
fasten the square tube by plastic head screws(location according to the
stamping line on the square tube). Then fix the TV bracket at two end of
square tube, fasten by plastic head screws. (Distance between two TV
brackets is same to the holes distance of TV back cover, main bracket is
considered as centre line.)Fix the lower support
bracket by 5pcs ④ M6*12 sink head screws and 5pcs ⑤ plastic
cushions. Then fix to the upper support bracket
by same way. Glass is fragile, so please be careful when you install!
( diagram 3)
Flat
mm
The second floor glass on
The first floor glass
see
12
11
3-4. Fasten 2pcs⑧tab on the upper holes of TV back cover by ⑥ M5*28
mm sink head screws, then hook TV with tab into the hole of TV
bracke. Using 2pcs ⑦ M5*23mm Sink head screws to go through
2pcs ⑨washers, slot of TV bracket, 2pcs ⑩ pads and the lower holes
of TV back cover in turn and fasten them. ( 4) see diagram
Diagram 3
Diagram 5
Diagram 6
Stamping line
of square tube
Lower support
bracket
Upper support
bracket
Plastic head
screw
2 PE O PL E L IF T T HE
AS S EM B LY UN IT.
Plastic
head
screw
Square tube
TV bracket
b: Fix the TV bracket at two end of
square tube, tighten by 6pcs
plastic head screws.
a: Lock the square tube and main bracket
according to the stamping line of tube.
Stamping line of square tube
Plastic
cushion
M6*10mm
Plastic
cushion
M6*12mm
Warning:
Do not connect with the
insert holes of TV directly !
Diagram 4
2 PE O PL E L IF T T HE
AS S EM B LY UN IT.
Tab
M5*28mm
M5*23mm
Pad
Washer
Main
bracket
Locking
plate
The top insert holes of post assembly is only to connect
the terminal of power input, TV signal input, VIDEO and
AUDIO signal input of TV. Please operate it according to
the installation instruction, otherwise manufacturer will
not bear compensation and law obligation for any damage
and safety problem.
Warning:
The base insert holes of post
assembly is for power input, TV
signal input, VIDEO and AUDIO
signal input. The outside signal can
be send to post assembly through it,
do not connect with the inserts
holes of TV directly. Please operate
it strictly according to the installa-
tion instruction, otherwise manuf-
acturer will not bear compensation
and law obligation for any damage
and safety problem.
AUDIO
POWER
(100~220V)
VIDEO
TV
R
L
AUDIO
POWER
(100~220V)
VIDEO
TV
R
L
T
h
e s
econ
d flo
o
r g
l
ass